Aufgaben:Exercise 2.5Z: Multi-Path Scenario: Unterschied zwischen den Versionen
Javier (Diskussion | Beiträge) |
|||
(14 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt) | |||
Zeile 2: | Zeile 2: | ||
{{quiz-Header|Buchseite=Mobile Kommunikation/Das GWSSUS–Kanalmodell}} | {{quiz-Header|Buchseite=Mobile Kommunikation/Das GWSSUS–Kanalmodell}} | ||
− | [[Datei: | + | [[Datei:EN_Mob_A_2_5Z.png|right|frame|Mobile radio scenario with three paths]] |
− | In [[ | + | In [[Aufgaben:Exercise_2.5:_Scatter_Function| Exercise 2.5]], a delay–Doppler function (or scatter function) was given. From this, we will calculate and interpret the other system functions. The given scatter function $s(\tau_0, f_{\rm D})$ was |
− | $$s(\tau_0, f_{\rm D}) =\frac{1}{\sqrt{2}} \cdot \delta (\tau_0) \cdot \delta (f_{\rm D} - 100\,{\rm Hz}) \ - \ $$ | + | :$$s(\tau_0, f_{\rm D}) =\frac{1}{\sqrt{2}} \cdot \delta (\tau_0) \cdot \delta (f_{\rm D} - 100\,{\rm Hz}) \ - \ $$ |
:$$\hspace{1.5cm} \ - \ \hspace{-0.2cm} \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D} \hspace{-0.05cm}- \hspace{-0.05cm}50\,{\rm Hz}) \ - \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D}\hspace{-0.05cm} + \hspace{-0.05cm}50\,{\rm Hz}) | :$$\hspace{1.5cm} \ - \ \hspace{-0.2cm} \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D} \hspace{-0.05cm}- \hspace{-0.05cm}50\,{\rm Hz}) \ - \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D}\hspace{-0.05cm} + \hspace{-0.05cm}50\,{\rm Hz}) | ||
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
Zeile 11: | Zeile 11: | ||
''Note:'' In our learning tutorial, $s(\tau_0, \hspace{0.05cm} f_{\rm D})$ is also identified with $\eta_{\rm VD}(\tau_0, \hspace{0.05cm}f_{\rm D})$ . | ''Note:'' In our learning tutorial, $s(\tau_0, \hspace{0.05cm} f_{\rm D})$ is also identified with $\eta_{\rm VD}(\tau_0, \hspace{0.05cm}f_{\rm D})$ . | ||
− | Here we have replaced the delay variable $\tau$ with $\tau_0$ . The new variable $\tau_0$ describes the difference between the | + | Here we have replaced the delay variable $\tau$ with $\tau_0$ . The new variable $\tau_0$ describes the difference between the delay of a path and the delay $\tau_1$ of the main path. The main path is thus identified in the above equation by $\tau_0 = 0$ . |
− | Now | + | Now, we try to find a mobile radio scenario in which this scatter function would actually occur. The basic structure is sketched above as a top view, and the following hold: |
* A single frequency is transmitted $f_{\rm S} = 2 \ \rm GHz$. | * A single frequency is transmitted $f_{\rm S} = 2 \ \rm GHz$. | ||
* The mobile receiver $\rm (E)$ is represented here by a yellow dot. It is not known whether the vehicle is stationary, moving towards the transmitter $\rm (S)$ or moving away from it. | * The mobile receiver $\rm (E)$ is represented here by a yellow dot. It is not known whether the vehicle is stationary, moving towards the transmitter $\rm (S)$ or moving away from it. | ||
* The signal reaches the receiver via a main path (red) and two secondary paths (blue and green). Reflections from the obstacles cause phase shifts of $\pi$. | * The signal reaches the receiver via a main path (red) and two secondary paths (blue and green). Reflections from the obstacles cause phase shifts of $\pi$. | ||
* ${\rm S}_2$ and ${\rm S}_3$ are to be understood here as fictitious transmitters from whose position the angles of incidence $\alpha_2$ and $\alpha_3$ of the secondary paths can be determined. | * ${\rm S}_2$ and ${\rm S}_3$ are to be understood here as fictitious transmitters from whose position the angles of incidence $\alpha_2$ and $\alpha_3$ of the secondary paths can be determined. | ||
− | * | + | * Let the signal frequency be $f_{\rm S}$, the angle of incidence $\alpha$, the velocity $v$ and the velocity of light $c = 3 \cdot 10^8 \ \rm m/s$. Then, the Doppler frequency is |
− | $$f_{\rm D}= {v}/{c} \cdot f_{\rm S} \cdot \cos(\alpha) | + | :$$f_{\rm D}= {v}/{c} \cdot f_{\rm S} \cdot \cos(\alpha) |
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
* The damping factors $k_1$, $k_2$ and $k_3$ are inversely proportional to the path lengths $d_1$, $d_2$ and $d_3$. This corresponds to the path loss exponent $\gamma = 2$. | * The damping factors $k_1$, $k_2$ and $k_3$ are inversely proportional to the path lengths $d_1$, $d_2$ and $d_3$. This corresponds to the path loss exponent $\gamma = 2$. | ||
Zeile 39: | Zeile 39: | ||
===Questionnaire=== | ===Questionnaire=== | ||
<quiz display=simple> | <quiz display=simple> | ||
− | {At first, consider only the Dirac function at $\tau = 0$ and $f_{\rm D} = 100 \ \rm Hz$. Which statements apply to the | + | {At first, consider only the Dirac function at $\tau = 0$ and $f_{\rm D} = 100 \ \rm Hz$. Which statements apply to the receiver? |
|type="()"} | |type="()"} | ||
- The receiver is standing. | - The receiver is standing. | ||
Zeile 58: | Zeile 58: | ||
{What statements apply to the green path? | {What statements apply to the green path? | ||
|type="[]"} | |type="[]"} | ||
− | + | + | + We have $\tau_0 = 1 \ \ \rm µ s$ and $f_{\rm D} = \, –50 \ \ \rm Hz$. |
− | - The angle $\alpha_3$ (see | + | - The angle $\alpha_3$ (see graph) is $60^\circ$. |
+ The angle $\alpha_3$ is $240^\circ$. | + The angle $\alpha_3$ is $240^\circ$. | ||
− | { | + | {Which of the following relations hold between the two side paths? |
|type="[]"} | |type="[]"} | ||
− | + | + | + $d_3 = d_2$. |
− | + | + | + $k_3 = k_2$. |
− | + | + | + $\tau_3 = \tau_2$. |
{What is the difference in time $\Delta d = d_2 - d_1$? | {What is the difference in time $\Delta d = d_2 - d_1$? | ||
|type="{}"} | |type="{}"} | ||
− | $\ Delta d \ = \ ${ 300 3% } $\ \ \rm m$ | + | $\Delta d \ = \ ${ 300 3% } $\ \ \rm m$ |
{What is the relationship between $d_2$ and $d_1$? | {What is the relationship between $d_2$ and $d_1$? | ||
Zeile 76: | Zeile 76: | ||
$d_2/d_1 \ = \ ${ 1,414 3% } | $d_2/d_1 \ = \ ${ 1,414 3% } | ||
− | { | + | {Find the distances $d_1$ and $d_2$ . |
|type="{}"} | |type="{}"} | ||
− | $d_1 \ = \ ${724 3% } $ | + | $d_1 \ = \ ${ 724 3% } $\ \rm m$ |
− | $d_2 \ = \ ${ 1024 3% } $ | + | $d_2 \ = \ ${ 1024 3% } $\ \rm m$ |
</quiz> | </quiz> | ||
===Sample solution=== | ===Sample solution=== | ||
{{ML-Kopf}} | {{ML-Kopf}} | ||
− | '''(1)''' The Doppler frequency is positive for $\tau_0$. This means that the receiver is moving towards the transmitter ⇒ <u> | + | '''(1)''' The Doppler frequency is positive for $\tau_0$. This means that the receiver is moving towards the transmitter ⇒ <u>solution 2</u> is correct. |
− | '''(2)''' The equation for the Doppler frequency is | + | '''(2)''' The equation for the Doppler frequency is |
− | $$f_{\rm D}= \frac{v}{c} \cdot f_{\rm S} \cdot \cos(\alpha) | + | :$$f_{\rm D}= \frac{v}{c} \cdot f_{\rm S} \cdot \cos(\alpha) |
− | \hspace{0.05cm}, | + | \hspace{0.05cm},$$ |
+ | If the angle of incidence is $\alpha=0$, the Doppler frequency is | ||
+ | :$$f_d=\frac{v}{c}\cdot f_S$$ | ||
− | * | + | *The speed of the receiver is then |
− | $$v = \frac{f_{\rm D | + | :$$v = \frac{f_{\rm D}}{f_{\rm S}} \cdot c = \frac{10^2\,{\rm Hz}}{2 \cdot 10^9\,{\rm Hz}} \cdot 3 \cdot 10^8\,{\rm m/s} = 15\,{\rm m/s} |
− | \hspace{0.1cm} \underline {= 54 \,{\rm km/h} | + | \hspace{0.1cm} \underline {= 54 \,{\rm km/h}} |
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
− | '''(3)''' | + | '''(3)''' <u>Solutions 1 and 4</u> are correct: |
− | *The Doppler frequency $f_{\rm D} = 50 \ \rm Hz$ comes from the blue path, because the receiver | + | *The Doppler frequency $f_{\rm D} = 50 \ \rm Hz$ comes from the blue path, because the receiver moves towards the virtual transmitter ${\rm S}_2$ (i.e., towards the reflection point), although not directly. In other words, the movement of the receiver <b>reduces</b> the blue path's length. |
*The angle $\alpha_2$ between the direction of movement and the connecting line ${\rm S_2 – E}$ is $60^\circ$: | *The angle $\alpha_2$ between the direction of movement and the connecting line ${\rm S_2 – E}$ is $60^\circ$: | ||
− | $$\cos(\alpha_2) = \frac{f_{\rm D | + | :$$\cos(\alpha_2) = \frac{f_{\rm D}}{f_{\rm S}} \cdot \frac{c}{v} = \frac{50 \,{\rm Hz}\cdot 3 \cdot 10^8\,{\rm m/s}}{2 \cdot 10^9\,{\rm Hz}\cdot 15\,{\rm m/s}} = 0.5 \hspace{0.3cm} \Rightarrow \hspace{0.3cm} \alpha_2 |
\hspace{0.1cm} \underline {= 60^{\circ} } | \hspace{0.1cm} \underline {= 60^{\circ} } | ||
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
− | '''(4)''' | + | '''(4)''' <u>Statements 1 and 3</u> are correct: |
*From $f_{\rm D} = \, –50 \ \rm Hz$ follows $\alpha_3 = \alpha_2 ± \pi$, so $\alpha_3 \ \underline {= 240^\circ}$. | *From $f_{\rm D} = \, –50 \ \rm Hz$ follows $\alpha_3 = \alpha_2 ± \pi$, so $\alpha_3 \ \underline {= 240^\circ}$. | ||
Zeile 111: | Zeile 113: | ||
'''(5)''' <u>All statements are correct</u>: | '''(5)''' <u>All statements are correct</u>: | ||
− | *The two Dirac functions at $± 50 \ \ \rm Hz$ have the same | + | *The two Dirac functions at $± 50 \ \ \rm Hz$ have the same delay. We have $\tau_3 = \tau_2 = \tau_1 + \tau_0$. |
− | *From the | + | *From the equality of the delays, however, also follows that $d_3 = d_2$. As both paths have the same length, their damping factors are also equal. |
− | '''(6)''' The | + | '''(6)''' The delay difference is $\tau_0 = 1 \ \rm µ s$, as shown in the equation for $s(\tau_0, f_{\rm D})$. |
* This gives the difference in length: | * This gives the difference in length: | ||
− | $$\Delta d = \tau_0 \cdot c = 10^{–6} {\rm s} \cdot 3 \cdot 10^8 \ \rm m/s \ \ \underline {= 300 \ \ \rm m}.$$ | + | :$$\Delta d = \tau_0 \cdot c = 10^{–6} {\rm s} \cdot 3 \cdot 10^8 \ \rm m/s \ \ \underline {= 300 \ \ \rm m}.$$ |
Zeile 125: | Zeile 127: | ||
*Then $k_1 = K/d_1$ and $k_2 = K/d_2$. | *Then $k_1 = K/d_1$ and $k_2 = K/d_2$. | ||
− | *The minus sign takes into account the $180^\circ$ | + | *The minus sign takes into account the $180^\circ$ phase rotation on the secondary paths. |
*From the weights of the Dirac functions one can read $k_1 = \sqrt{0.5}$ and $k_2 = -0.5$. From this follows: | *From the weights of the Dirac functions one can read $k_1 = \sqrt{0.5}$ and $k_2 = -0.5$. From this follows: | ||
− | $$\frac{ | + | :$$\frac{d_2}{d_1} = \frac{k_1}{-k_2} = \frac{1/\sqrt{2}}{0.5} = \sqrt{2} |
− | \hspace{0.15cm} \underline {= 1 | + | \hspace{0.15cm} \underline {= 1.414} |
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
Zeile 135: | Zeile 137: | ||
− | '''(8)''' | + | '''(8)''' From $d_2/d_1 = 2^{-0.5}$ and $\Delta d = d_2 \, - d_1 = 300 \ \rm m$ finally follows: |
:$$\sqrt{2} \cdot d_1 - d_1 = 300\,{\rm m} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} | :$$\sqrt{2} \cdot d_1 - d_1 = 300\,{\rm m} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} | ||
− | d_1 = \frac{300\,{\rm m | + | d_1 = \frac{300\,{\rm m}}{\sqrt{2} - 1} \hspace{0.15cm} \underline {= 724\,{\rm m}} |
\hspace{0.3cm} \Rightarrow \hspace{0.3cm} d_2 = \sqrt{2} \cdot d_1 \hspace{0.15cm} \underline {= 1024\,{\rm m}} | \hspace{0.3cm} \Rightarrow \hspace{0.3cm} d_2 = \sqrt{2} \cdot d_1 \hspace{0.15cm} \underline {= 1024\,{\rm m}} | ||
\hspace{0.05cm}. $$ | \hspace{0.05cm}. $$ |
Aktuelle Version vom 11. Mai 2020, 15:12 Uhr
In Exercise 2.5, a delay–Doppler function (or scatter function) was given. From this, we will calculate and interpret the other system functions. The given scatter function $s(\tau_0, f_{\rm D})$ was
- $$s(\tau_0, f_{\rm D}) =\frac{1}{\sqrt{2}} \cdot \delta (\tau_0) \cdot \delta (f_{\rm D} - 100\,{\rm Hz}) \ - \ $$
- $$\hspace{1.5cm} \ - \ \hspace{-0.2cm} \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D} \hspace{-0.05cm}- \hspace{-0.05cm}50\,{\rm Hz}) \ - \frac{1}{2} \cdot \delta (\tau_0 \hspace{-0.05cm}- \hspace{-0.05cm}1\,{\rm \mu s}) \cdot \delta (f_{\rm D}\hspace{-0.05cm} + \hspace{-0.05cm}50\,{\rm Hz}) \hspace{0.05cm}.$$
Note: In our learning tutorial, $s(\tau_0, \hspace{0.05cm} f_{\rm D})$ is also identified with $\eta_{\rm VD}(\tau_0, \hspace{0.05cm}f_{\rm D})$ .
Here we have replaced the delay variable $\tau$ with $\tau_0$ . The new variable $\tau_0$ describes the difference between the delay of a path and the delay $\tau_1$ of the main path. The main path is thus identified in the above equation by $\tau_0 = 0$ .
Now, we try to find a mobile radio scenario in which this scatter function would actually occur. The basic structure is sketched above as a top view, and the following hold:
- A single frequency is transmitted $f_{\rm S} = 2 \ \rm GHz$.
- The mobile receiver $\rm (E)$ is represented here by a yellow dot. It is not known whether the vehicle is stationary, moving towards the transmitter $\rm (S)$ or moving away from it.
- The signal reaches the receiver via a main path (red) and two secondary paths (blue and green). Reflections from the obstacles cause phase shifts of $\pi$.
- ${\rm S}_2$ and ${\rm S}_3$ are to be understood here as fictitious transmitters from whose position the angles of incidence $\alpha_2$ and $\alpha_3$ of the secondary paths can be determined.
- Let the signal frequency be $f_{\rm S}$, the angle of incidence $\alpha$, the velocity $v$ and the velocity of light $c = 3 \cdot 10^8 \ \rm m/s$. Then, the Doppler frequency is
- $$f_{\rm D}= {v}/{c} \cdot f_{\rm S} \cdot \cos(\alpha) \hspace{0.05cm}.$$
- The damping factors $k_1$, $k_2$ and $k_3$ are inversely proportional to the path lengths $d_1$, $d_2$ and $d_3$. This corresponds to the path loss exponent $\gamma = 2$.
- This means: The signal power decreases quadratically with distance $d$ and accordingly the signal amplitude decreases linearly with $d$.
Notes:
- This task belongs to chapter Das GWSSUS–Kanalmodell.
- We focus especially on the path-loss model and the Doppler effect.
Questionnaire
Sample solution
(2) The equation for the Doppler frequency is
- $$f_{\rm D}= \frac{v}{c} \cdot f_{\rm S} \cdot \cos(\alpha) \hspace{0.05cm},$$
If the angle of incidence is $\alpha=0$, the Doppler frequency is
- $$f_d=\frac{v}{c}\cdot f_S$$
- The speed of the receiver is then
- $$v = \frac{f_{\rm D}}{f_{\rm S}} \cdot c = \frac{10^2\,{\rm Hz}}{2 \cdot 10^9\,{\rm Hz}} \cdot 3 \cdot 10^8\,{\rm m/s} = 15\,{\rm m/s} \hspace{0.1cm} \underline {= 54 \,{\rm km/h}} \hspace{0.05cm}.$$
(3) Solutions 1 and 4 are correct:
- The Doppler frequency $f_{\rm D} = 50 \ \rm Hz$ comes from the blue path, because the receiver moves towards the virtual transmitter ${\rm S}_2$ (i.e., towards the reflection point), although not directly. In other words, the movement of the receiver reduces the blue path's length.
- The angle $\alpha_2$ between the direction of movement and the connecting line ${\rm S_2 – E}$ is $60^\circ$:
- $$\cos(\alpha_2) = \frac{f_{\rm D}}{f_{\rm S}} \cdot \frac{c}{v} = \frac{50 \,{\rm Hz}\cdot 3 \cdot 10^8\,{\rm m/s}}{2 \cdot 10^9\,{\rm Hz}\cdot 15\,{\rm m/s}} = 0.5 \hspace{0.3cm} \Rightarrow \hspace{0.3cm} \alpha_2 \hspace{0.1cm} \underline {= 60^{\circ} } \hspace{0.05cm}.$$
(4) Statements 1 and 3 are correct:
- From $f_{\rm D} = \, –50 \ \rm Hz$ follows $\alpha_3 = \alpha_2 ± \pi$, so $\alpha_3 \ \underline {= 240^\circ}$.
(5) All statements are correct:
- The two Dirac functions at $± 50 \ \ \rm Hz$ have the same delay. We have $\tau_3 = \tau_2 = \tau_1 + \tau_0$.
- From the equality of the delays, however, also follows that $d_3 = d_2$. As both paths have the same length, their damping factors are also equal.
(6) The delay difference is $\tau_0 = 1 \ \rm µ s$, as shown in the equation for $s(\tau_0, f_{\rm D})$.
- This gives the difference in length:
- $$\Delta d = \tau_0 \cdot c = 10^{–6} {\rm s} \cdot 3 \cdot 10^8 \ \rm m/s \ \ \underline {= 300 \ \ \rm m}.$$
(7) The path loss exponent was assumed to be $\gamma = 2$ for this task.
- Then $k_1 = K/d_1$ and $k_2 = K/d_2$.
- The minus sign takes into account the $180^\circ$ phase rotation on the secondary paths.
- From the weights of the Dirac functions one can read $k_1 = \sqrt{0.5}$ and $k_2 = -0.5$. From this follows:
- $$\frac{d_2}{d_1} = \frac{k_1}{-k_2} = \frac{1/\sqrt{2}}{0.5} = \sqrt{2} \hspace{0.15cm} \underline {= 1.414} \hspace{0.05cm}.$$
- The constant $K$ is only an auxiliary variable that does not need to be considered further.
(8) From $d_2/d_1 = 2^{-0.5}$ and $\Delta d = d_2 \, - d_1 = 300 \ \rm m$ finally follows:
- $$\sqrt{2} \cdot d_1 - d_1 = 300\,{\rm m} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} d_1 = \frac{300\,{\rm m}}{\sqrt{2} - 1} \hspace{0.15cm} \underline {= 724\,{\rm m}} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} d_2 = \sqrt{2} \cdot d_1 \hspace{0.15cm} \underline {= 1024\,{\rm m}} \hspace{0.05cm}. $$