Aufgaben:Exercise 1.2Z: Lognormal Fading Revisited: Unterschied zwischen den Versionen

Aus LNTwww
Wechseln zu:Navigation, Suche
 
(Eine dazwischenliegende Version von einem anderen Benutzer wird nicht angezeigt)
Zeile 3: Zeile 3:
 
}}
 
}}
  
[[Datei:P_ID2123__Mob_Z_1_2.png|right|frame|Path loss model <br>with lognormal fading]]
+
[[Datei:P_ID2123__Mob_Z_1_2.png|right|frame|Path loss plus lognormal fading]]
 
We assume similar conditions as in &nbsp; [[Aufgaben:Exercise_1.2:_Lognormal_Channel_Model|Task 1. 2]]&nbsp; but now we summarize the purely distance-dependent path loss&nbsp; $V_0$&nbsp; and the mean value&nbsp; $m_{\rm S}$&nbsp; of the lognormal&ndash;fading (the index &bdquo;S&rdquo; stands for <i>Shadowing</i>):
 
We assume similar conditions as in &nbsp; [[Aufgaben:Exercise_1.2:_Lognormal_Channel_Model|Task 1. 2]]&nbsp; but now we summarize the purely distance-dependent path loss&nbsp; $V_0$&nbsp; and the mean value&nbsp; $m_{\rm S}$&nbsp; of the lognormal&ndash;fading (the index &bdquo;S&rdquo; stands for <i>Shadowing</i>):
$$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$
+
:$$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$
  
 
The total path loss is then given by the equation
 
The total path loss is then given by the equation
Zeile 11: Zeile 11:
  
 
where&nbsp; $V_2(t)$&nbsp; describes a ''lognormal&ndash;distribution''&nbsp; with mean value zero:
 
where&nbsp; $V_2(t)$&nbsp; describes a ''lognormal&ndash;distribution''&nbsp; with mean value zero:
$$f_{V{\rm 2}}(V_{\rm 2}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}}  \cdot {\rm exp } \left [ - \frac{ V_{\rm 2} ^2}{2 \cdot \sigma_{\rm S}^2} \right ] \hspace{0.05cm}.$$
+
:$$f_{V_{\rm S}}(V_{\rm S}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}}  \cdot {\rm e }^{ - { (V_{\rm S}\hspace{0.05cm}- \hspace{0.05cm}m_{\rm S})^2}/(2 \hspace{0.05cm}\cdot \hspace{0.05cm}\sigma_{\rm S}^2) }\hspace{0.05cm}.$$
  
 
The path loss model shown in the graphic is suitable for the scenario described here:  
 
The path loss model shown in the graphic is suitable for the scenario described here:  
 
*Multiply the transmitted signal&nbsp; $s(t)$&nbsp; first with a constant factor&nbsp; $k_1$&nbsp; and further with a stochastic quantity&nbsp; $z_2(t)$&nbsp; with the probability density function (PDF)&nbsp; $f_{\rm z_2}(z_2)$, then the signal&nbsp; $r(t)$ results at the output, whose power&nbsp; $P_{\rm E}(t)$&nbsp; is of course also time-dependent due to the stochastic component.  
 
*Multiply the transmitted signal&nbsp; $s(t)$&nbsp; first with a constant factor&nbsp; $k_1$&nbsp; and further with a stochastic quantity&nbsp; $z_2(t)$&nbsp; with the probability density function (PDF)&nbsp; $f_{\rm z_2}(z_2)$, then the signal&nbsp; $r(t)$ results at the output, whose power&nbsp; $P_{\rm E}(t)$&nbsp; is of course also time-dependent due to the stochastic component.  
 
*The PDF of the lognormally distributed random variable&nbsp; $z_2$&nbsp; is for&nbsp; $z_2 &#8805; 0$:
 
*The PDF of the lognormally distributed random variable&nbsp; $z_2$&nbsp; is for&nbsp; $z_2 &#8805; 0$:
$$f_{z{\rm 2}}(z_{\rm 2}) = \frac {{\rm exp } \left [ - {\rm ln}^2 (z_{\rm 2}) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2}   \hspace{0.3cm}{\rm with}  \hspace{0.3cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$
+
:$$f_{z_{\rm 2}}(z_{\rm 2}) = \frac {{\rm e^{- {\rm ln}^2 (z_{\rm 2})
 +
/({2 \hspace{0.05cm}\cdot \hspace{0.05cm} C^2 \hspace{0.05cm} \cdot \hspace{0.05cm} \sigma_{\rm S}^2})
 +
} } }{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2}   \hspace{0.8cm}{\rm mit}  \hspace{0.8cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$
  
 
*For&nbsp; $z_2 &#8804; 0$&nbsp; this PDF is equal to zero.
 
*For&nbsp; $z_2 &#8804; 0$&nbsp; this PDF is equal to zero.
Zeile 29: Zeile 31:
 
* This task belongs to the chapter&nbsp; [[Mobile_Kommunikation/Distanzabh%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distanzabhängige Dämpfung und Abschattung]].
 
* This task belongs to the chapter&nbsp; [[Mobile_Kommunikation/Distanzabh%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distanzabhängige Dämpfung und Abschattung]].
 
* Use the following parameters:
 
* Use the following parameters:
$$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm}  \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$
+
:$$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm}  \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$
 
   
 
   
 
* The probability that a mean-free Gaussian random variable&nbsp; $z$&nbsp; is greater than its standard deviation&nbsp; $\sigma$, is
 
* The probability that a mean-free Gaussian random variable&nbsp; $z$&nbsp; is greater than its standard deviation&nbsp; $\sigma$, is
$${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$
+
:$${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$
 
* Also, &nbsp; ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$
 
* Also, &nbsp; ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$
 
* Again for clarification: &nbsp; $z_2$&nbsp; is the fading coefficient in linear units, while &nbsp; $V_2$&nbsp; is the fading coefficient in logarithmic units.  
 
* Again for clarification: &nbsp; $z_2$&nbsp; is the fading coefficient in linear units, while &nbsp; $V_2$&nbsp; is the fading coefficient in logarithmic units.  
 
*The following conversions apply:
 
*The following conversions apply:
$$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm}
+
:$$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm}
 
V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$$
 
V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$$
  
Zeile 77: Zeile 79:
 
{{ML-Kopf}}
 
{{ML-Kopf}}
 
'''(1)'''&nbsp; The constant $k_1$ generates the time-independent path loss $V_1 = 60 \ \rm dB$. From this follows:
 
'''(1)'''&nbsp; The constant $k_1$ generates the time-independent path loss $V_1 = 60 \ \rm dB$. From this follows:
$$k_{\rm 1} = 10^{-V_{\rm 1}/(20\hspace{0.05cm} {\rm dB})} \hspace{0.15cm} \underline{= 0.001}\hspace{0.05cm}.$$
+
:$$k_{\rm 1} = 10^{-V_{\rm 1}/(20\hspace{0.05cm} {\rm dB})} \hspace{0.15cm} \underline{= 0.001}\hspace{0.05cm}.$$
  
  
Zeile 89: Zeile 91:
  
 
*The PDF&ndash;value for the abscissa value $z_2 = 1$ is obtained by inserting it into the given equation:
 
*The PDF&ndash;value for the abscissa value $z_2 = 1$ is obtained by inserting it into the given equation:
:$$f_{z{\rm 2}}(z_{\rm 2} = 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac {{\rm exp } \left [ - {\rm ln}^2 (z_2 = 1) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot (z_2 = 1)}=\frac {1}{ \sqrt{2 \pi } \cdot \sigma_{\rm S} \cdot \frac {1}{  C  } =
+
:$$f_{z{\rm 2}}(z_{\rm 2} = 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac {{\rm e^{- {\rm ln}^2 (z_{\rm 2}=1)
 +
/({2 \hspace{0.05cm}\cdot \hspace{0.05cm} C^2 \hspace{0.05cm} \cdot \hspace{0.05cm} \sigma_{\rm S}^2})
 +
} } }{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot (z_2 = 1)}  =
 
  \frac {1}{ \sqrt{2 \pi } \cdot 6\,\,{\rm dB} }  \cdot \frac {20\,\,{\rm dB}}{  {\rm ln} \hspace{0.1cm}(10)  }   
 
  \frac {1}{ \sqrt{2 \pi } \cdot 6\,\,{\rm dB} }  \cdot \frac {20\,\,{\rm dB}}{  {\rm ln} \hspace{0.1cm}(10)  }   
 
  \hspace{0.15cm} \underline{\approx 0.578}\hspace{0.05cm}.$$
 
  \hspace{0.15cm} \underline{\approx 0.578}\hspace{0.05cm}.$$
Zeile 102: Zeile 106:
  
 
'''(4)'''&nbsp; If you take into account the relationship between $z_2$ and $V_2$, you get
 
'''(4)'''&nbsp; If you take into account the relationship between $z_2$ and $V_2$, you get
$${\rm Pr}(z_{\rm 2} > 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 0\,\,{\rm dB})\hspace{0.15cm} \underline{= 0.5}
+
:$${\rm Pr}(z_{\rm 2} > 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 0\,\,{\rm dB})\hspace{0.15cm} \underline{= 0.5}
 
  \hspace{0.05cm},$$
 
  \hspace{0.05cm},$$
$${\rm Pr}(z_{\rm 2} > 0.5) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 6\,\,{\rm dB}) = 1- {\rm Pr}(V_{\rm 2} > 6\,\,{\rm dB})= 1- {\rm Pr}(V_{\rm 2} > \sigma_{\rm S})= 1- {\rm Q}(1)\hspace{0.15cm} \underline{= 0.842}
+
:$${\rm Pr}(z_{\rm 2} > 0.5) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 6\,\,{\rm dB}) = 1- {\rm Pr}(V_{\rm 2} > 6\,\,{\rm dB})= 1- {\rm Pr}(V_{\rm 2} > \sigma_{\rm S})= 1- {\rm Q}(1)\hspace{0.15cm} \underline{= 0.842}
 
  \hspace{0.05cm},$$
 
  \hspace{0.05cm},$$
$${\rm Pr}(z_{\rm 2} > 4) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < -12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > +12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > 2 \sigma_{\rm S})
+
:$${\rm Pr}(z_{\rm 2} > 4) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < -12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > +12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > 2 \sigma_{\rm S})
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
  
Zeile 121: Zeile 125:
  
 
*Half of the time, $P_{\rm E} = 1 \ \rm &micro; W$, while each of the following has $25\%$ probability::
 
*Half of the time, $P_{\rm E} = 1 \ \rm &micro; W$, while each of the following has $25\%$ probability::
$$V_{\rm 2}= +10\,\,{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^7} = 0.1\,\,{\,}{\rm &micro; W}\hspace{0.05cm},$$
+
:$$V_{\rm 2}= +10\,\,{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^7} = 0.1\,\,{\,}{\rm &micro; W}\hspace{0.05cm},$$
$$V_{\rm 2}= -10\,\,{\,}{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^5} = 10\,\,{\,}{\rm &micro; W}\hspace{0.05cm}.$$
+
:$$V_{\rm 2}= -10\,\,{\,}{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^5} = 10\,\,{\,}{\rm &micro; W}\hspace{0.05cm}.$$
  
 
*The mean value is then:
 
*The mean value is then:
$${\rm E}[P_{\rm E}(t)] = 0.5 \cdot 1\,{\rm &micro; W}+ 0.25 \cdot 0.1\,{\rm &micro; W}+ 0.25 \cdot 10\,{\rm &micro; W}= 3.025\,{\rm &micro; W} > P_{\rm E}\hspace{0.05cm}' = 1\,{\rm &micro; W}
+
:$${\rm E}[P_{\rm E}(t)] = 0.5 \cdot 1\,{\rm &micro; W}+ 0.25 \cdot 0.1\,{\rm &micro; W}+ 0.25 \cdot 10\,{\rm &micro; W}= 3.025\,{\rm &micro; W} > P_{\rm E}\hspace{0.05cm}' = 1\,{\rm &micro; W}
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
  

Aktuelle Version vom 15. Juni 2020, 13:53 Uhr

Path loss plus lognormal fading

We assume similar conditions as in   Task 1. 2  but now we summarize the purely distance-dependent path loss  $V_0$  and the mean value  $m_{\rm S}$  of the lognormal–fading (the index „S” stands for Shadowing):

$$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$

The total path loss is then given by the equation $$V_{\rm P} = V_{\rm 1} + V_{\rm 2}(t)$$

where  $V_2(t)$  describes a lognormal–distribution  with mean value zero:

$$f_{V_{\rm S}}(V_{\rm S}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}} \cdot {\rm e }^{ - { (V_{\rm S}\hspace{0.05cm}- \hspace{0.05cm}m_{\rm S})^2}/(2 \hspace{0.05cm}\cdot \hspace{0.05cm}\sigma_{\rm S}^2) }\hspace{0.05cm}.$$

The path loss model shown in the graphic is suitable for the scenario described here:

  • Multiply the transmitted signal  $s(t)$  first with a constant factor  $k_1$  and further with a stochastic quantity  $z_2(t)$  with the probability density function (PDF)  $f_{\rm z_2}(z_2)$, then the signal  $r(t)$ results at the output, whose power  $P_{\rm E}(t)$  is of course also time-dependent due to the stochastic component.
  • The PDF of the lognormally distributed random variable  $z_2$  is for  $z_2 ≥ 0$:
$$f_{z_{\rm 2}}(z_{\rm 2}) = \frac {{\rm e^{- {\rm ln}^2 (z_{\rm 2}) /({2 \hspace{0.05cm}\cdot \hspace{0.05cm} C^2 \hspace{0.05cm} \cdot \hspace{0.05cm} \sigma_{\rm S}^2}) } } }{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2} \hspace{0.8cm}{\rm mit} \hspace{0.8cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$
  • For  $z_2 ≤ 0$  this PDF is equal to zero.




Notes:

$$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm} \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$
  • The probability that a mean-free Gaussian random variable  $z$  is greater than its standard deviation  $\sigma$, is
$${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$
  • Also,   ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$
  • Again for clarification:   $z_2$  is the fading coefficient in linear units, while   $V_2$  is the fading coefficient in logarithmic units.
  • The following conversions apply:
$$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm} V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$$


Questionnaire

1

How large should the constant  $k_1$  be?

$k_1\ = \ $

2

Which value range applies to the random variable  $z_2$?

All values between  $-∞$ and $+∞$  are possible.
The random size  $z_2$  is not negative.
The smallest possible value is  $z_2 = 0.5$.
The largest possible value is  $z_2 = 2$.

3

Calculate the PDF  $f_{\rm z2}(z_2)$  for some abscissa values.

$f_{\rm z2}(z_2 = 0)\ = \ $

$f_{\rm z2}(z_2 = 1)\ = \ $

$f_{\rm z2}(z_2 = 2)\ = \ $

4

Calculate the following probabilities.

${\rm Pr}(z_2 > 1.0)\ = \ $

${\rm Pr}(z_2 > 0.5)\ = \ $

${\rm Pr}(z_2 > 4.0)\ = \ $

5

What statements are valid for the average receive power  ${\rm E}\big [P_{\rm E}(t)\big]$?
Note:  $P_{\rm E}'$ is the power after multiplication by  $k_1$  (see diagram).

${\rm E}[P_{\rm E}(t)] = P_{\rm E}'$
${\rm E}[P_{\rm E}(t)] < P_{\rm E}'$.
  ${\rm E}[P_{\rm E}(t)] > P_{\rm E}'$.


Sample solution

(1)  The constant $k_1$ generates the time-independent path loss $V_1 = 60 \ \rm dB$. From this follows:

$$k_{\rm 1} = 10^{-V_{\rm 1}/(20\hspace{0.05cm} {\rm dB})} \hspace{0.15cm} \underline{= 0.001}\hspace{0.05cm}.$$


(2)  Only the second statement is correct:

  • For the Gaussian random variable $V_2$ all values between $–∞$ and $+∞$ are (theoretically) possible.
  • The transformation $z_2 = 10^{{\it –V_2}\rm /20}$ results in only positive values for the linear random variable $z_2$, namely between 0 (if $V_2$ is positive and goes to infinity) and $+∞$ (very large negative values of $V_2$).


(3)  The random value $z_2$ can only be positive. Therefore the PDF value $f_{\rm z2}(z_2 = 0)\hspace{0.15cm} is \underline{ = 0}$.

  • The PDF–value for the abscissa value $z_2 = 1$ is obtained by inserting it into the given equation:
$$f_{z{\rm 2}}(z_{\rm 2} = 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac {{\rm e^{- {\rm ln}^2 (z_{\rm 2}=1) /({2 \hspace{0.05cm}\cdot \hspace{0.05cm} C^2 \hspace{0.05cm} \cdot \hspace{0.05cm} \sigma_{\rm S}^2}) } } }{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot (z_2 = 1)} = \frac {1}{ \sqrt{2 \pi } \cdot 6\,\,{\rm dB} } \cdot \frac {20\,\,{\rm dB}}{ {\rm ln} \hspace{0.1cm}(10) } \hspace{0.15cm} \underline{\approx 0.578}\hspace{0.05cm}.$$
  • The first portion is equal to the WDF–value $f_{{{\it V}2}(V_2 = 0)$.
  • $C$ considers the amount of the derivative of the non-linear characteristic $z_2 = g(V_2)$ for $V_2 = 0 \ \rm dB$ or $z_2 = 1$.
  • Finally, for $z_2 = 2$:
$$f_{z{\rm 2}}(z_{\rm 2} = 2) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac {f_{z{\rm 2}}(z_{\rm 2} = 1)}{ z_{\rm 2} = 2} \cdot {\rm exp } \left [ - \frac {{\rm ln}^2 (2)}{2 \cdot C^2 \cdot \sigma_{\rm S}^2} \right ]= \frac {0.578}{ 2} \cdot {\rm exp } \left [ - \frac {0.48}{0.952} \right ] \hspace{0.15cm} \underline{\approx 0.174}\hspace{0.05cm}. $$


(4)  If you take into account the relationship between $z_2$ and $V_2$, you get

$${\rm Pr}(z_{\rm 2} > 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 0\,\,{\rm dB})\hspace{0.15cm} \underline{= 0.5} \hspace{0.05cm},$$
$${\rm Pr}(z_{\rm 2} > 0.5) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 6\,\,{\rm dB}) = 1- {\rm Pr}(V_{\rm 2} > 6\,\,{\rm dB})= 1- {\rm Pr}(V_{\rm 2} > \sigma_{\rm S})= 1- {\rm Q}(1)\hspace{0.15cm} \underline{= 0.842} \hspace{0.05cm},$$
$${\rm Pr}(z_{\rm 2} > 4) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < -12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > +12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > 2 \sigma_{\rm S}) \hspace{0.05cm}.$$
  • The probability that a Gaussian variable is greater than $2 \cdot \sigma$ equals ${\rm Q}(2)$:

$${\rm Pr}(z_{\rm 2} > 4) = {\rm Q}(2)\hspace{0.15cm} \underline{= 0.023} \hspace{0.05cm}.$$


(5)  The statement 3 is correct:

  • The first statement is certainly not correct, since the mean value $m_{\rm S}$ refers to the logarithmic received power (in $\rm dBm$).
  • To clarify whether the second or the third statement is correct, we assume $P_{\rm S} = 1 \ \rm W$, $V_1 = 60 \ \rm dB$  ⇒  $P_{\rm E}' = 1 \ {\rm µ W}$ and the following PDF for $V_2$:
$$f_{V{\rm 2}}(V_{\rm 2}) = 0.5 \cdot \delta (V_{\rm 2}) + 0.25 \cdot \delta (V_{\rm 2}- 10\,\,{\rm dB}) + 0.25 \cdot \delta (V_{\rm 2}+ 10\,\,{\rm dB})\hspace{0.05cm}.$$
  • Half of the time, $P_{\rm E} = 1 \ \rm µ W$, while each of the following has $25\%$ probability::
$$V_{\rm 2}= +10\,\,{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^7} = 0.1\,\,{\,}{\rm µ W}\hspace{0.05cm},$$
$$V_{\rm 2}= -10\,\,{\,}{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^5} = 10\,\,{\,}{\rm µ W}\hspace{0.05cm}.$$
  • The mean value is then:
$${\rm E}[P_{\rm E}(t)] = 0.5 \cdot 1\,{\rm µ W}+ 0.25 \cdot 0.1\,{\rm µ W}+ 0.25 \cdot 10\,{\rm µ W}= 3.025\,{\rm µ W} > P_{\rm E}\hspace{0.05cm}' = 1\,{\rm µ W} \hspace{0.05cm}.$$
  • This simple calculation with discrete probabilities instead of a continuous PDF indicates that statement 3 is correct.